27/10/2023, 18:59 Modules 1 - 3: Basic Network Connectivity and Communications Exam Answers
Learn to program in Python
JetBrains Academy: A hands-on environment that's integrated w
JetBrains IDEs.
JetBrains Learn
CCNA Exam Answers
.coin
Follow:CCNA 1 v7.02 (ITN) CCNA 2 v7.02 (SRWE) CCNA 3 v7.02 (ENSA) CCNA v6 CCNA Security v2.0
You might also like...
AUGUST 9, 2021
ITN ( Version 7.00) -
ITNv7 Practice Final
Exam Answers
J # ■ AUGUST 9, 2021
CCNA 1 ITN (Version
7.00) Final PT Skills Assessment (PTSA)
Answers
AUGUST 9, 2021
ITN (Version 7.00) - ITN
Practice PT Skills
Assessment (PTSA)
AUGUST 9, 2021
Modules 16-17:
Building and Securing
a Small Network Exam
A t
Exam Answers Answers
CCNAv7 Module 13 Quiz - Network Virtualization Answers Modules 4 - 7: Ethernet Concepts Exam Answers
CCNA 1 V7 ANSWERS AUGUST 7, 2021
Modules 1 - 3 : Basic Network Connectivity and
Communications Exam Answers
15,183 Views by adminccna
I CCNA VERSION 7.0 EXAM ANSWERS
CCNA 1 v7 CCNA 2 v7
CCNA 3 v7
Modules 1 - 3: Basic Network
Connectivity and Communications
Exam
Modules 4 - 7 : Ethernet Concepts
Exam
Modules 8 - 1 0 : Communicating
Between Networks Exam
Modules 11 - 13: IP Addressing
Exam
ITN ( Version 7.00) - Basic Network Connectivity and
Communications Exam Answers
1. Why would a Layer 2 switch need an IP address?
* to enable the switch to send broadcast frames to attached PCs
* to enable the switch to function as a default gateway
* to enable the switch to be managed remotely
* to enable the switch to receive frames from attached PCs
Modules 14- 15: Network
Application Communications ExamExplanation: r 2 device, does not need an IP address to transmit frames to attached
devices. However, when aVeitch is accessed remotely through the network, it must have a Layer 3 address-
The IP address must be applied to a virtual interface rather than to a physical interface. Routers, not
switches, function as default gateways.
Modules 16 - 17: Building and
Securing a Small Network Exam
!TNv7 Practice PT Skills
Assessment (PTSA) Exam
https://ccnaexainanswers.com/modules-l-3-basic-network-connectivity-and-communications-exam-answers.html 1/17

Modules 1
-
3: Basic Network Connectivity and Communications Exam Answers27/10/2023,
1
8:59
2. Refer to the exhibit. An administrator is trying to configure the switch but receives the error message
that is displayed in the exhibit. What is the problem? ITNv7 Practice Final Exam
ITNv7 Final Skills Exam (PTSA)
Answers
ITN Final Skills Exam (Equipment)
Answers
CCNA 1 ITNv7 FINAL EXAM
Answers Full
CCNA-l-v7-Modules-l-3-Basic Network
Connectivity and Communications Exam
Answers 54
•
The entire command, configure terminal, must be used.
•
The administrator is already in global configuration mode.
•
The administrator must first enter privileged EXEC mode before issuing the command.
•
The administrator must connect via the console port to access global configuration mode.
I
RANDOM POSTS
‘
5.1.9 Packet Tracer
-
Configure
Named Standard IPv4 ACLs
(Answers)
p
10.6.13 Lab
-
Research
Password Recovery Procedures (Answers)
Explanation: In order to enter global configuration mode, the command configure terminal, or
a
shortened
version such as config t, must be entered from privileged EXEC mode. In this scenario the administrator is in
user EXEC mode, as indicated by the
>
symbol after the hostname. The administrator would need to use the
enable command to move into privileged EXEC mode before entering the configure terminal command.
r t
T--A 2.7.2 Lab
-
Configure Single-
Area OSPFv2 (Answers)
3. What term describes
a
network owned by one organization that provides safe and secure access to
individuals who work for
a
different organization?
•
extranet
•
cloud
-
BYOD
■ quality of service
56. What term describes storing personal files on servers over the internet to provide access anywhere,
anytime, and on any device?
•
cloud
» BYOD
•
quality of service
•
converged network
4. What term describes a network where one computer can be both client and server?
•
peer-to-peer
•
cloud
•
BYOD
•
quality of service
5. What term describes a type of network used by people who work from home or from a small remote
office?
-
SOHO network
-
BYOD
•
quality of service
•
converged network
6. What term describes a computing model where server software runs on dedicated computers?
•
client/server
•
internet
•
intranet
•
extranet
7. What term describes a type of network used by people who work from home or from a small remote
office?
6.2.4 Packet Tracer
-
Configure
EtherChannel (Instructions
Answer)
CCNA 1 Introduction to Networks
Ver 6.0
-
ITN Chapter 6 Exam
Answers
Cobasi: Vida Traz Vida
Cobasi
’
SOHO network
* internet
’
iptranct
extranet
8. What term describes a technology that allows devices to connect to the LAN using an electrical
outlet?
powerline networking
2/17https://ccnaexamanswers.com/modules-l-3-basic-network-connectivity-and-communications-exam-answers.html

27/10/2023. 18:59
* internet
* intranet
* extranet
9. What term describes a policy that allows network devices to manage the flow of data to give priority to
voice and video?
* quality of service
* internet
' intranet
■ extranet
10. What term describes a private collection of LANs and WANs that belongs to an organization?
’ intranet
* internet
* extranet
' peer-to-peer
11. What term describes the ability to use personal devices across a business or campus network?
- BYOD
* internet
* intranet
* extranet
12. At which OSI layer is a source IP address added to a PDU during the encapsulation process?
’ network layer
* data link layer
* transport layer
* application layer
13. At which OSI layer is a destination port number added to a PDU during the encapsulation process?
* transport layer
■ data link layer
■ network layer
■ application layer
14. Which command or key combination allows a user to return to the previous level in the command
hierarchy?
* end
* exit
* Ctrl-Z
* Ctrl-C
Modules 1 - 3 : Basic Network Connectivity and Communications Exam Answers
Explanation: End and CTRL-Z return the user to the privileged EXEC mode. Ctrl-C ends a command in
process. The exit command returns the user to the previous level.
15. What are two characteristics of RAM on a Cisco device? (Choose two.)
» RAM provides nonvolatile storage.
* The configuration that is actively running on the device is stored in RAM.
* The contents of RAM are lost during a power cycle.
* RAM is a component in Cisco switches but not in Cisco routers.
» RAM is able to store multiple versions of TOS and configuration files.
Explanation: RAM stores data that is used by the device to support network operations. The running
configuration is stored in RAM. This type of memory is considered volatile memory because data is lost
during a power stores the IOS and delivers a copy of the IOS into RAM when a device
is powered on. fflWmemor ronvolatile since it retains stored contents during a loss of power.
16. Which two host names follow the guidelines for naming conventions on Cisco IOS devices? (Choose
two.)
Branch? I
https://ccnaexamanswers.com/modules-l-3-basic-network-connectivity-and-communications-exam-answers.html 3/17

27/10/2023. 18:59 Modules 1 - 3 : Basic Network Connectivity and Communications Exam Answers
RM-3-Switch-2A4
Flood 15)
HO Floor 17
SwBranch799
Explanation: Some guidelines for naming conventions are that names should:
Start with a letter
Contain no spaces
End with a letter or digit
Use only letters, digits, and dashes
Be less than 64 characters in length
17. How is SSH different from Telnet?
SSH makes connections over the network, whereas Telnet is for out-of-band access.
SSH provides security to remote sessions by encrypting messages and using user authentication.
Telnet is considered insecure and sends messages in plaintext.
SSH requires the use of the PuTTY terminal emulation program. Tcra Term must be used to connect to
devices through the use of Telnet.
SSH must be configured over an active network connection, whereas Telnet is used to connect to a device
from a console connection.
Explanation: SSH is the preferred protocol for connecting to a device operating system over the network
because it is much more secure than Telnet. Both SSH and Telnet are used to connect to devices over the
network, and so are both used in-band. PuTTY and Terra Term can be used to make both SSH and Telnet
connections.
18. An administrator is configuring a switch console port with a password. In what order will the
administrator travel through the IOS modes of operation in order to reach the mode in which the
configuration commands will be entered? (Not all options are used.)
CCNA-l-v7-Modules-l-3-Basic Network Connectivity and Communications Exam Answers 24
Explanation: The configuration mode that the administrator first encounters is user EXEC mode. After the
enable command is entered, the next mode is privileged EXEC mode. From there, the configure termina 1
command is entered to move to global configuration mode. Finally, the administrator enters the line console
0 command to enter the mode in which the configuration will be entered.
19. What are three characteristics of an SVI? (Choose three.)
https://ccnaexamanswers.com/modules-l-3-basic-network-connectivity-and-communications-exam-answers.html 4/17

27/10/2023, 18:59 Modules 1 - 3: Basic Network Connectivity and Communications Exam Answers
It is designed as a security protocol to protect switch ports.
It is not associated with any physical interface on a switch.
It is a special interface that allows connectivity by different types of media.
It is required to allow connectivity by any device at any location.
It provides a means to remotely manage a switch.
It is associated with VLAN 1 by default.
Explanation: Switches have one or more switch virtual interfaces (SVIs). SVIs are created in software since
there is no physical hardware associated with them. Virtual interfaces provide a means to remotely manage a
switch over a network that is using IP. Each switch comes with one SVI appearing in the default configuration
"out-of-the-box." The default SVI interface is VLAN1.
20. What command is used to verify the condition of the switch interfaces, including the status of the
interfaces and a configured IP address?
ipconfig
ping
traceroute
show ip interface brief
Explanation: The show ip interface brief command is used to display a brief synopsis of the condition of the
device interfaces. The ipconfig command is used to verify TCP/IP properties on a host. The ping command is
used to verify Layer 3 connectivity. The traceroute command is used to trace the network path from source to
destination.
21. Match the description with the associated IOS mode. (Not all options are used.)
https://ccnaexamanswers.com/modules-l-3-basic-network-connectivity-and-communications-exam-answers.html 5/17

27/10/2023. 18:59 Modules 1 - 3 : Basic Network Connectivity and Communications Exam Answers
22. Match the definitions to their respective CLI hot keys and shortcuts. (Not all options arc used.)
Explanation: The shortcuts with their functions are as follows:
- Tab - Completes the remainder of a partially typed command or keyword
- Space bar - displays the next screen
- ? - provides c
- Up Arrow - Al
- Ctrl-C - cancels any command currently being entered and returns directly to privileged EXEC mode
- Ctrl-Shift-6 - Allows the user to interrupt an IOS process such as ping or traceroute
P
backward through former commands
23. In the show running-config command, which part of the syntax is represented by running-config?
https://ccnaexamanswers.com/modules- l-3-basic-network-connectivity-and-communications-exam-answers.html 6/17

Loading page 6...

Modules 1 - 3 Basic Network Connectivity and Commu

Study Now!

Document Details

Related Documents

DevOps and Its Importance Study Notes

Veeam Certified Engineer VMCE-V12

Notes CCNA

CCNA 200-301 Portable Command Guide 5th Edition 20

CCNA 200-301 Portable Command Guide 5th Edition 22

CCNA 200-301 Portable Command Guide 5th Edition 36

Foundations of Novell Networking Section 26

Modulo 7 DHCPv4

Build and troubleshooting Integration Challenge

Entregable 02 Red Hat Kevin Cortez

Company

Explore

Study Tools